PPI SOFTIE 180 Back, Owner'S Manual And Packing Instructions

Page: 44 / 47

42
Owners Manual - Revision 1.5
Figure 4.13.11
Figure 4.14.1 Figure 4.14.1.2
4.13.11 Using the Checklist, sections 4.1.1 and 4.1.5, be sure you
have removed all tools from the container system. Close the pin
cover flap. Figure 4.13.11
4.13.12. Fill in the appropriate information on the packing data card
and your log book and install packing data card in the packing data
card pocket.
4.14 Softie Seat
4.14.1 Close the rear flap of the container first. Be sure to place the canopy protector flaps
into position as shown in Figure 4.13.1. Close the front flap second and use temporary pins to
hold the flaps closed; again being sure the canopy protector flaps are in position as in Figure
4.13.1. Always maintain high visibility of the temporary pins. Figure 4.14.1
Note:
Only one pass of the canopy shall run between the two (2) closing loops; creating a pocket for
the Pilot chute. Figure 4.14.1.2