2
User Manual
neuro 202
KEYS
There are four tactile keys provided on the front panel for configuring the controller, setting-up the parameter values and
selecting Operation Modes. Refer Table 1.2 for detailed key operations.
Table 1.2
Symbol
Key
Function
Press to enter or exit set-up mode.
PAGE
DOWN
UP
ENTER /
ACK
Set up Mode : Press to store the set parameter value and to scroll
to the next parameter on the PAGE.
Run Mode : Press to acknowledge any pending Alarm(s). This
also turns off the Alarm relay.
Press to increase the parameter value. Pressing once increases the
value by one count; keeping pressed speeds up the change.
Press to decrease the parameter value. Pressing once decreases
the value by one count; keeping pressed speeds up the change.
Status
Indicator
• Indicate Output-1, Output-2 & Output-3 ON/OFF status, respectively, if the
Output type is Relay or SSR.
• Remain OFF if the Output type is DC Linear.
OP1
OP2
OP3
MAN
• Glows if the Manual (PID) mode is active.
• Remains OFF if Automatic (PID). Standby or Profile mode is active.
