5
HumiTherm Plus for PC
User Manual
OPERATOR PARAMETERS
The Operator Parameters are accessible under PASSWORD 0. The list includes Parameters for adjusting Control setpoints,
Alarm setpoints & Zero-offset for Temperature & %RH.
The Figure 3.1 shows how to access Operator Parameters. The Example illustrates changing the setpoint value for %RH from
60.0 to 70.0.
Section 3
Parameter Description
Settings
(Default Value)
SP Low Limit to
SP High Limit
(Default : 60.0)
%RH SET VALUE >>
Set Value for %RH Control.
Set Value for Temperature Control.
TEMP. SET VALUE >>
Table 3.1
SP Low Limit to
SP High Limit
(Default : 25.0)
The Table 3.1 below described the Operator Parameters in detail.
or
Next Parameter
TEMP. LO DEVIATION >>
2.0
%RH SET VALUE >>
60.0
Desired Parameter
%RH SET VALUE >>
70.0
Desired Value
Press UP/DOWN Keys
to adjust Parameter Value
Press ENTER Key
to store the New Value
& to move to Next Parameter
Figure 3.1
°C
%RH
3/02/15
10:40:06
25.2
60.3
25.0
60.0
SP
SP
ENTER PASSWORD >>
0
TEMP. SET VALUE >>
25.0
RUN Mode
Main Screen
Default Password
for Operator Parameters
First Parameter
Press SET-UP Key
for Password Entry
Press ENTER Key
To open Operator
Parameter List
Press & Release
ENTER Key until Desired
Parameter appears
