Property of
www.ppgplans.com
– Do not duplicate or make public.
Last Revised Version: January 2010
© PPGPlans.com
Warnings & Disclaimers.
This product shows how to build a basic frame only for Powered Paragliding. It is the responsibility
of the builders and operators to install any and all safety features they deem necessary for safe
operation of this equipment. There are no industry standards or regulations. You are responsible
for your own safety.
Do not build or fly this product unless you are willing to assume all risks inherent in the sport of
Powered Paragliding and all responsibilities for any property damage, injury, or death which may
result from the use of this product.
Failure to perform a complete and thorough preflight has been a contributing factor to accidents
in all kinds of aircraft. Equipment damage, bodily injury, even death can occur due to equipment
problems not caught in a proper preflight inspection.
Acknowledgements
The initial design of the Skybolt V2 (& V1) frame is credited to
Jeff Baumgartner
, pioneer of the
self-made paramotor.
Jeff Goin
, as president of USPPA and in favor of the growth of the sport worldwide acquired the
rights to the design from Jeff Baumgartner and made available to the public, free of charge on
the website
www.ppgplans.com
To all those other handy-men, garage tinkerers and in general, all those involved with the growth
and development of the PPG sport, we acknowledge your support, feedback, critique, pictures,
comments, that have been the basis for developing this manual.
This manual was last revised and updated by
Jorge Hidalgo
Final version published on
January 2010
.
