• Should you experience any malfunction or damage to the mains cable, disconnect from the mains supply
immediately and consult a qualified engineer.
• All parts should be replaced with genuine spare parts and carried out by a qualified engineer.
Contents & Unpacking:
Before beginning your initial setup check the unit has not been damaged in transit. In the event there is
damage to the housing, cable or internal components contact your dealer immediately. The loudspeaker is
supplied with a remote control and power cable.
Specification:
Code:
MP15B
Mains Supply:
230Vac 50Hz
Power:
200 Watts Max
Battery:
Internal
Mic Input:
Jack/XLR 10mV
Radio Mic:
Range 50 Metres Approx Unobstructed
Aux:
RCA/3.5mm Jack 100mV
Mix Output:
RCA 100mV
EQ:
+/- 12dB
Bluetooth:
10 Metres Range Approx
Removable Memory: USB & Standard SD
Dimensions:
440 x 690 x 350mm, Stand Fitting 35mm
Weight:
17kg
First Time Operation:
• Before you start using this system, please check there is no transportation damage, should there be
any, please do not use the device and contact your dealer immediately.
• Set all the level controls to minimum.
(2,6)
• Plug in an SD or USB card with suitable music files in MP3 format.
(1)
Alternatively connect a microphone to the microphone socket
(7)
or external sound source to one of the
line input connections.
(10,11)
• Connect the System (s) to the mains supply
(22)
and switch on the power at the wall socket and on the
rear of the loudspeaker.
(21)
• Allow a few moments for the electronics to initialise
• The power on indicator will illuminate on the rear control panel
(20)
and the battery charge indicator will
illuminate when its charging. If you disconnect the mains power the system will work from its internal
battery for around 5 hours under normal use from a fully charged battery.
• The PA System is ready to use
• Advance to level control on the microphone and or auxillary input to a suitable level.
•
You can also choose to use one or both of the radio microphones at this point, to do so, extend the
telescopic aerials
(16,17)
, switch the microphone switch to on
(15)
and turn on one or both hand mics. The
RF lights will illuminate
(12,13)
then advance the level controls
(12,13)
to the desired level.
• The Echo control can be advanced to introduce echo onto the microphone channels (5)
• You can turn on Microphone priority with a separate switch, this will make the music sound level reduce
when speeking through the microphone.
• To start the MP3 player select the correct mode, select a track, press the start button and turn up the level
control
(13)
to the desired level.
• You can can control the player remotely with the small hand remote control. Point the controller at the
front of the cabinet for best effect.
• To connect a bluetooth player select BT by pressing the player mode button and pair this device with your
remote bluetooth source, such as a phone. When to two devices are connected the control (2) will set the
desired volume level.
