User Manual
MP15B Portable PA
Dear Customer,
Thank you for purchasing the Perform PA MP15B Portable PA System.
This unit has been designed and manufactured to the highest of standards so you can be assured you have
made a good investment.
For your safety and to ensure you make full use of all the features of this product, please read this manual in
full.
Safety Advice:
• Read this manual in full before operating this product.
• Keep this manual in a safe place for future reference.
• Heed all warnings and instructions, both in this manual and on the product.
• Carry and transport this product with care. Dropping this product may result in serious mechanical failure.
• The manufacturer accepts no responsibility for injury or damage caused as a result of not following the
manual provided.
• Turn off and unplug this loudspeaker from the mains supply when not in use.
• This PA System is not waterproof and should not be used outside.
• Ensure the cabinet is positioned for use in a suitable place where it can’t slip and cause injury.
• If the loudspeaker is fitted to a stand make sure it is suitable to carry the load and is positioned in a suitable
place.
Protection from Electric Shock:
• Only connect this unit to a mains socket with suitable trip and RCD protection.
• To disconnect from the mains socket, always remove by the mains plug. Do not attempt to remove by
pulling the mains cable.
• Disconnect the unit from the mains supply before cleaning. Cleaning should be carried out with a soft, dry
cloth.
• Do not expose this unit to any liquids.
• Do not operate near exposed water or in high humidity.
• Choose a suitable route for all cables, ensuring trip hazards are avoided and the cables are not at risk of
being crushed.
• Do not open this unit to service. There are no user serviceable parts inside. Any servicing or repairs should
be carried out by a qualified engineer only. Any attempt to service or adapt this unit will leave your
warranty void and could result in serious malfunction or injury.
• Should you need to replace the power fuse, do so with the identical size and rating.
Protection from Fire:
• Do not place near sources of heat or ignition.
• Do not cover or block any ventilation holes.
• Check your AC wall socket will take the power you are applying to avoid overloading the mains supply.
Protection from Injury and Damage:
• Do not attempt to modify this unit.
• Always install the unit in a suitable stable location.
• Check this unit matches the mains voltage and frequency before plugging it in to your mains socket.
• In the event that any object or liquid enters the machine, switch off immediately, remove from mains and
consult a qualified engineer.
