10
11
2nd Step:
The dimensions of the base must be appropriate for the dimensions of
the operator. The concrete base should be at a distance of approximately 20 mm
from the face of the gate leaf.
3rd Step:
Once the conditions are attend, fully open the gate and position the
operator close to the face of the gate leaf, obeying the 50 mm measurement
between the leaf end and the concrete base.
4th Step:
Pre-align the operator to the gate, positioning the rack over the gear and
leaning the set against the gate. Then mark the fixing holes in the floor or concrete
base.
5th Step:
Drill holes for fixing, positioning the operator aligned with the gate.
Before tightening the 1/2” x 4” parabolt anchors, move the gate, checking that
it does not touch the operator during its journey. If this happens, back off the
operator.
20 mm
VISTA LATERAL
FOLHA DO PORTÃO
BASE DE CONCRETO
50mm
MARCAR OS FUROS
DE FIXAÇÃO NO PISO
DE FIXAÇÃO NO PISO
MARCAR OS FUROS
FUROS DE FIXAÇÃO
DO AUTOMATIZADOR
FUROS DE FIXAÇÃO
DO AUTOMATIZADOR
PARABOLT
PARABOLT
GATE LEAF
SIDE VIEW
MARK THE FLOOR
FIXING HOLES
AUTOMATIZER
FIXING HOLES
AUTOMATIZER
FIXING HOLES
MARK THE FLOOR
FIXING HOLES
CONCRETE BASE
