8 A-OMNI-0232-02_PCL
Note:
The recommended drill hole
diameter for OMNI -232-02 is Ø20mm.
Go to: www.poynting.tech to download the scale 1:1 template.
•
Clean the entire surface on which you
plan to mount the antenna. Cleaning is
done so as not to damage the vehicle’s
paint and to ensure good contact of
the foam surface to the mounting area.
Alcohol wipes can be used to remove
oil and dirt from the surface.
•
Remove the wax protection paper from
the adhesive foam seal at the base of
the antenna.
•
Insert the antenna cables and threaded
spigot through the drilled hole.
•
Push the antenna down onto the
mounting surface and make sure
the antenna is placed straight and
correctly.
•
Fit the M18 star washer and M18 nut from
the inside of the mounting platform.
•
Tighten the M18 Nut to 20Nm torque.
Be careful not to over tighten the nut.
Installation Instructions
5
