12 A-OMNI-0232-02_PCL
• When drilling, remember to:
1. Use safety goggles when drilling the
holes.
2. Avoid using bits that are dull, bent
or damaged.
3.
Be aware of where your fingers are
in relation to the drill bit when using
the drilling machine.
4. To stop the drilling machine, let the
drill chuck come to a complete
stop on its own. Do not grasp the
chuck in an attempt to stop the drill
bit.
5. Hold the drill correctly, as a sudden
slip could cause severe damage to
your hand.
CAUTION:
Antennas must be installed to provide
a separation distance of at least 20cm
from all persons so as to comply with SAR
(Specific Absorption Rate) RF Exposure
requirements.
European Waste Electronic Equipment Directive 2002/96/EC
Please ensure that old waste
electricals and electronics are recycled.
Directive 2011/65/EU (RoHS 2)
This product is fully compliant with the RoHS
2 directive.
Safety
8
