Version: 3.0
7
Introduction
3
XPOL-2 is a unique pole mountable, high gain,
CPE antenna. It can be mounted outdoors on
a pole of up to 50mm in diameter.
Follow the instructions below for installation.
Mounting Configurations:
1. Pole Mounting
•
Lay the antenna out at the installation site
and assemble the antenna on the ground.
•
Place the pipe clamp through the bracket as
shown below.
•
Next place the cable clamp around the pole
and tighten the screw on the cable clamp
until the bracket is secured to the pole.
•
Mount the antenna so that there is at least 1
meter of clearance in all directions around
it and unobstructed line of sight to the cell
tower’s strongest signal.
Summary of Contents for A-XPOL-0002-V2
Page 2: ...2 A XPOL 0002_PCL...
