4
Fig. 5
Fig. 6
Fig. 7
MACHINE SET-UP
Sandpaper disk holder
Fitting the dustbag
The sandpaper disk holder is a tapered nut.
After unpacking the machine, proceed as follows:
1
Fit the suction tube
2
Fit the dustbag holder
3
Fit the dustbag
1
Sandpaper discs with an adhesive backing
:
use 178 mm. disks and simply place the sandpaper disk
on the sanding disk (Fig. 6).
2
Sandpaper discs with a paper backing
: use 178
mm disks with a 22 mm hole.
3
Take off the taper nut.
HOW TO OPERATE THE MACHINE
4
Place the sandpaper disk, then the taper nut and
secure it. (Fig. 7).
Fitting the sandpaper
