18
PowerXL Vortex Dual-Basket Air Fryer Pro™
Cleaning & Storage
Clean the appliance after each use. The baskets and the
Fry Tray are coated with a special nonstick surface. Never
use abrasive cleaning materials or utensils on these
surfaces. DO NOT soak or submerge the appliance in
water or wash in a dishwasher.
1. Remove the Power Cable from the wall socket
and be certain the appliance is thoroughly cooled
before cleaning.
2. Wipe the outside of the appliance with a warm,
moist cloth and mild detergent.
3. Clean the baskets and the Fry Tray with hot water,
a mild detergent, and a nonabrasive sponge.
NOTE: The Fry Tray is dishwasher safe.
TIP: Should the Fry Tray contain difficult-to-remove
food particles, soak in hot, soapy water for 10 minutes.
NOTE: The rubber bumpers on the Fry Tray are part
of the Fry Tray and should generally not be removed.
However, if the rubber bumpers need to be cleaned,
they can be removed and reattached: To remove
the rubber bumpers, locate the capped end of the
bumpers and push the capped end off of the Fry Tray.
There will be some resistance, but keep pushing until
the rubber bumpers come off of the Fry Tray. Take
note of the slot on which the bumpers were sitting.
To reattach the rubber bumpers, align the hole in the
rubber bumpers with the slots from which the rubber
bumpers were removed. Slide the rubber bumpers all
the way back onto the slot on the Fry Tray.
4. Clean the inside of the appliance with hot water, a mild
detergent, and a nonabrasive sponge.
5. If necessary, remove unwanted food residue from
the heating element with a soft cleaning brush.
6. Rinse the appliance with a clean, damp cloth. Use a
clean, dry cloth to dry the appliance interior. Do not
leave standing water in the appliance.
7. If any other service needs to be performed, contact
Customer Service, using the contact information on
the back of this manual.
1. Unplug the appliance and let it cool down thoroughly.
2. Make sure all components are clean and dry.
3. Place the appliance in a clean, dry place.
Cleaning
Storage
NOTE: For storage, the U-Channel Connector may
be mounted on the placeholder on the back of the
appliance as shown.