10
PowerXL Vortex Dual-Basket Air Fryer Pro™
Instructions for Use
1. Read all material, warning stickers, and labels
2. Remove all packing materials, stickers, and labels
from the appliance.
3. Wipe the inside and outside of the cooking appliance
with a warm, moist cloth and mild detergent. Rinse
with a clean, moist cloth. Never submerge the
appliance. Handwash all cooking accessories.
4. Place the appliance on a stable, horizontal, level,
and heat-resistant surface. Do not place on the stove
top. Ensure that the appliance is used in an area with
good air circulation and away from hot surfaces and
combustible materials. Do not place on a stove top.
5. Before cooking food, preheat the appliance for a
few minutes to allow the appliance to burn off the
manufacturer’s protective coating of oil. Wipe the
appliance with warm, soapy water and a washcloth
after this burn-in cycle.
6. Place the Fry Trays in the Baskets. Slide the Baskets
into the Main Unit Housing. If the Basket is placed
properly, it will click into place.
NOTE:
This appliance
cooks using hot air. Do not fill the
Basket with oil or frying fat. Do not put anything on top
of the appliance. This disrupts the airflow and affects the
cooking results.
Before First Use
NOTE: Assemble the Basket
Dividers with with the arrow
pointing downward.
For Double (4.5-Quart) Baskets
1. Remove the baskets from the Main Unit Housing.
2. If present, lift the Fry Trays from the baskets, and remove
the U-Channel Connector.
3. Orient a Basket Divider so that the arrow is outside of
the basket and pointing downward (see
Fig. 1
). Push the
Basket Divider all the way into the basket’s groove slot.
4. Push the Fry Tray into the basket so that Rubber Bumpers
are pressed against the bottom of the basket.
5. Repeat steps 3 and 4 for the other basket.
For Large (9-Quart) Basket
1. Remove the baskets from the Main Unit Housing.
2. If present, lift the Fry Trays from the baskets and remove
the Basket Dividers.
3. Place the baskets against each other so that the open
sides of the baskets are aligned. Align the U-Channel
Connector with the groove slots on both sides of the
baskets simultaneously (see
Fig. 2
). Slide both sides of
the U-Channel Connector downward at the same time
while applying outward pressure to both sides of the
U-Channel Connector so that the U-Channel Connector
attaches to both groove slots at the same time (see
Fig. 3
).
NOTE: To remove the U-Channel Connector, pull it out
of position slowly and evenly.
4. Push the Fry Trays into the baskets so that the Rubber
Bumpers are pressed against the bottom of the baskets.
Assembling the Baskets
Fig. 1
Fig. 2
Fig. 3
Scan this QR code with your tablet
or smartphone’s camera to watch
a quick video tutorial showing you
how to assemble the Fry Baskets.