5. LINE Input:
This ¼-inch unbalanced input (mono / stereo mixed) may be used to connect a line
level signal, high-impedance microphone, keyboard, drum machine or other audio devices.
4. MIC Input:
This XLR input is designed for low-impedance microphones or equipment that has a
Mic-level, balanced output. This input is not intended for line level signals, as distortion may occur.
2. Volume:
This control adjusts the volume level of the unit.
3. Thru:
This XLR Jack is used to pass a signal from the Mic Input of the PW4P to another device
such as a mixer or mic input device. If connected to a mixer with phantom power, the phantom power
passes through to the mic input and can supply power to a condenser microphone.
1. Power:
This switch activates AC power to the powered PA.
6. AC Power Cord Receptacle:
Insert the PW4P’s AC cord firmly into the AC receptacle. Be sure to
use the cable provided with your PW4P. The power cord can be removed for storage or replacement if
damaged. Note: Replace the AC cord if its protective jacket is damaged or ground pin is damaged or
removed.
CONTROLS & FEATURES OVERVIEW
:
2. Volume
5. Line Input
3. Thru
4. Mic Input
6. AC Power Cord Receptacle
1. Power
