Turbo Settings
The Switch Pro Grip Controller includes 2 settings of turbo mode:
Semi-Automatic and Full-Automatic.
Turbo mode can be set on the following buttons:
A key, B key, X key, Y key, + key, - key, L key, R key, ZL key, ZR key, Directional Pad (up, down,
left and right), L3 key (left 3D joystick press key) and R3 (right 3D joystick press key).
Semi-automatic Turbo function
With semi-automatic turbo function, you can set
a select button to automatically activate when it
is held down.
1. Press and hold the turbo key.
2. Press the button to apply turbo to.
Semi-automatic turbo can be set to multiple
buttons at a time.
Full-automatic Turbo function
With full-automatic turbo function, you can select a
button to automatically activate when it is pressed once.
1. Press and hold the turbo key
2. Press the button to apply turbo to
3. Repeat steps 1 & 2 again and turbo will
start immediately
4. To turn off, press and hold the turbo key and the
button which has had turbo applied to.
Full-automatic turbo can only be set to one button
at a time.
Clear Turbo function of a single button
1. Press and hold Turbo plus the button which you want cleared
Clear Turbo function of all keys
1. Press and hold the Turbo key for 10 seconds.
B
A
Y
X
1
1
PRO GRIP CONTROLLER
I N S T R U C T I O N S
SWITCH
B
A
Y
X
B
A
Y
X
