How to Connect
1. Start up the Switch console.
Enter “System Settings”. Select
“Controllers and Sensors”.
Ensure the “Pro Controller
Wired Communication” setting
is turned On.
2. Remove the Joy-Cons from your console.
3. Position the console with the USB Type-C port downwards. Line up the Switch
tracks with the tracks on the Grip and carefully slide the console into the Pro
Grip Controller until it snugly clicks into the USB Type-C charging plug.
a. Be careful not to
touch the joysticks or
any other buttons when
plugging in the console.
4. With the console on, Press A
on the Pro Grip Controller
and it will connect.
5. To finalise setup, we recommend you
calibrate the Control Sticks (joysticks)
and Motion controls. These settings can
be found under “Controllers and
Sensors” in “System Settings”.
6. To remove, gently use two hands to
push the bottom corners of the console
upwards, then slide the console away
from the Grip.
B
A
Y
X
2
B
A
Y
X
3
4
PRO GRIP CONTROLLER
I N S T R U C T I O N S
SWITCH
