PowerWave MRac L Feet Installation Manual Download Page 14

E N E R G Y

INSTALLATION MANUAL

Powerwave Energy (hereinafter as “Powerwave Energy”) warrants to 
the original purchaser (“Purchaser”) of product(s) that it manufactures 
(“Product”) at the original installation site that the Product shall be 
free from defects in material and workmanship for a period of ten (10) 
years, except for the anodized finish which shall be free from visible 
peeling, or cracking or chalking under normal atmospheric conditions.

Warranties and guarantees can only be claimed if the installation and 
commissioning of the photovoltaic system was done by professional 
personnel, as can be proved. We guarantee a 10 year warranty for the 
durability of all our MRac PV mounting products that are correctly 
mounted, installed and used as our Installation Guide says.

Powerwave Energy shall not be liable for consequential, contingent or 
incidental damages arising out of the use of the Product by Purchaser 
under any circumstances. If within the specified Warranty periods the 
Product shall be reasonably proven to be defective, then Powerwave 
Energy shall repair or replace the defective Product, or any part 
thereof, in Powerwave Energy’s sole discretion. 

Such repair or replacement shall completely satisfy and discharge all 
of Powerwave Energy’s liability with respect to this Limited Warranty. 
Under no circumstances shall Powerwave Energy be liable for special, 
indirect or consequential damages arising out of or related to use by 
Purchaser of the Product. Manufacturers of related items, such as PV 
modules and flashings, may provide written warranties of their own. 
Powerwave Energy’s Limited Warranty covers only its Product, and not 
any related items.

The warranty period begins from the delivery or pick up date from 
Powerwave Energy factory or warehouse. The replacement or repair  
of defective components does not extend the warranty period.

10 Year Limited Product Warranty, 

5 Year After Sales Service

Warranty

  |  

13

Summary of Contents for MRac L Feet















Reviews: