OS-1933-E3-003
Installation Instructions
2-4
044-05243 Rev A
Figure 2-1 AC Power Connections Example
RF Cable
All cable connections are made at the system cabinet lower-rear RF interface bulkhead panel as listed in Table
2-6. Figure 2-2 shows the interface bulkhead ports. Verify the BTS output power does not exceed the
requirements detailed in Chapter 5.
CAUTION:
Prior to connecting BTS cables, verify booster system power is off.
NOTE:
Do not install weatherproofing materials to cables until the booster commissioning is completed.
Table 2-6 OS System RF Cable Connections
Bulkhead Port Connector
Connects between...
BTS TX1/RX
BTS
OS System
BTS TX2/RX
BTS
OS System
TX3
BTS
OS System
TX4
BTS
OS System
ANT TX/RX
OS System
Antenna
ANT RX
OS System
Antenna
L G N
J1
0.5 to 0.625"
AC Power
Connections
Common Earth
Ground Terminal
Spring Cage
Terminal Block
