PowerWalker VI 1000RT LCD, Manual

Page: 37 / 40

WinPower is UPS monitoring software, featuring user-friendly interface to monitor and
control your UPS. This unique software provides complete power protection for
computer system while power failure. With the software users can monitor any UPS
status on the same LAN. Furthermore, a UPS can provide security protection for more
than one computer on the same LAN at the same time, such as shutting down system
in security, saving application data and shutting down the UPS when power fails.
Connected by USB to a PC or notebook, the Software enables communication
between the UPS and the computer. The UPS software monitors the status of the
UPS, shuts down the system before the UPS is exhausted and can remotely observe
the UPS via the Network (enabling users to manage their system more effectively).
Upon AC failure or UPS battery low, UPS takes all necessary actions without interven-
tion from the system administrator. In addition to automatic file saving and system
shut-down functions, it can also send warning messages via pager, e-mail etc.
Software Installation on your PC:
Use the bundled CD and follow the on-screen instructions to install the software
WinPower.
Enter the following serial No. to install software: 511C1-01220-0100-478DF2A
After the software is successfully installed, the communication with UPS has been
established and an green icon will appear in the system tray.
Double-click the icon to use the monitor software (as above).
You can schedule UPS shutdown/start-up and monitor UPS status through PC.
Detail instructions please refer to the e-manual in the software.
Check www.powerwalker.com/winpower.html from time to time to get the latest
version of monitoring software.