23
EN
3.8 Turn off the UPS with mains (AC source)
1) To turn off the UPS, please press the ON/OFF button
continuously for more than 1 second.
2) After pressing the button, UPS will have no output. If the mains
power is normal, the Line LED will turn on. If there is no mains
power, 10 seconds later, the numeric area of LCD display will be
lighted in sequence, finally all the LCD and LED will be blackout,
and UPS shutdown completely.
Note 1:
If the UPS
’s bypass mode is enabled, the output socket
will still have voltage directly from mains power after switching
the UPS off.
Note 2:
There is a risk of power interruption for the loads if the
UPS works in bypass mode.
3) To turn off the output of UPS and shut down the UPS completely,
it is recommended the mains power of UPS shall be
disconnected.
Note:
please make sure all the loads are prepared or turned off
before shutting down the UPS.
3.9 Turn off the UPS with battery (DC) only
1) To turn off the UPS in battery mode, please press the ON/OFF
button continuously for more than 1 second.
2) After pressing the ON/OFF button, the buzzer will sound beep
once. The numeric area of LCD display will be lighted in
sequence, finally all the LCD and LED will be blackuot, and UPS
shutdown completely
Note:
please make sure all the loads are prepared or turned off
before shutting down the UPS.
