14
EN
2. Installation
2.1 Safety Instructions for Installation
Installation Personnel
Installation Environment
Do not install and operate the UPS if there is water
condensation which may occur if the UPS is moved suddenly from a
cold environment to a warm one. The UPS must be absolutely dry
before being installed and operated. Please allow an acclimatization
time of at least 2 hours. Otherwise hazard of electric shock may
exist!
Do not install the UPS in the environment where it is damp or
would be exposed to direct sunlight or heat. Ensure the UPS is far
away from water, inflammable gas and corrosive agents.
Do not block the air vents on the housing of UPS. The UPS
must be installed in a location with good ventilation. Ensure enough
space on each side for ventilation.
This product must be installed only by qualified or
professional personnel accord to safety instructions!
Please read the following safety instructions before
installation!
