background image

Storage & Maintenance

The  unit  contains no user-serviceable parts. If the battery service life
(3~5  years  at  25°C  ambient  temperature)  has  been  exceeded,  the

batteries must be replaced. In this case, please contact your dealer.

Storage 

Before  storing,  charge  the  unit  4  hours.  Store  the  unit  covered  and 
upright in a cool, dry location. During storage, recharge the battery in 
accordance with the following table: 
Storage Temperature 

Recharge Frequency 

Charging Duration 

-25°C - 40°C

Every 3 months 

1-2 hours

40°C - 45°C 

Every 2 months 

1-2 hours

Be sure to deliver the spent battery to a recycling facility or ship 

it to your dealer in the replacement battery packing material. 

Installation and Setup

NOTE: 

Before installation, please inspect the unit. Be sure that nothing inside

 

the package is damaged. Please keep the original package in a safe place for

 

future use

CAUTION – A battery can present a risk of electrical shock and high short

 

circuit current.   The following precaution should be observed when

 

working on batteries:

1.

Remove watches, rings, or other metal objects.

2.

Use tools with insulated handles.

3.

Wear rubber gloves and boots.

4.

Do not lay tools or metal parts on top of batteries.

5.

Disconnect charging source prior to connecting or disconnecting

 

battery terminals.

Do not plug or unplug the battery connector if UPS works in DC

(discharging) mode. 

Summary of Contents for BP A48R-8x9Ah








Reviews: