POWERUCC Panorama X2 Blackbox, Manual

Page: 8 / 32

8
Main Features
5. Motion D etection
▶ The X2 automatically switches to standby mode when you park or
stop the car. The X2 starts recording when motion is detected.
6. MPEG MP4
▶
The X2 records video in the MPEG H.264 MP4 format.
7. G-sensor
▶
If the G-sensor is triggered, the current file will be moved into a protected folder
and will no longer be overwritten until the card is formated.
IMPORTANT NOTE: Formatting the memory card WILL DELETE ALL FILES
including protected files. Save and back-up all files prior to formatting the memory
card.
8.
Parking Mode Power Control (Low Voltage Cut-Off)
▶
Select a constant voltage that matches the battery of your vehicle. The battery
discharge prevention system is meant to prevent a complete discharge of the
vehicle battery.
When the vehicle battery voltage is below the X2 set voltage,
the X2 will power off. This way you can be sure you always have plenty of
power remaining to start your vehicle
9. Dual S lot S ystem
▶
The X2 contains two separate memory card slots. A Micro-SD card must
be inserted in each of 2 slots to record both front and rear cameras. The top slot
is for the rear camera, and is marked with the letter "R". The bottom slot is for the
front camera and is marked with the letter "F".