User manual 6/10 kVA Rev.2
3. Operation
3.4 Configuration Settings
`
Output Voltage / Frequency
Step 1. In this screen, press the “Enter” key to enter the following steps for output voltage /
frequency adjustment.
Display 11
– Output Voltage/
Frequency Setting Volt/Freq Set
220 VAC 50 Hz
Step 2. The cursor ( ) will pop up to indicate the output voltage and frequency newly selected.
Display 11
– Output Voltage/
Frequency Setting Volt/Freq Set
220 VAC 50 Hz
Display 11
– Output Voltage/
Frequency Setting Volt/Freq Set
220 VAC 50 Hz
Step 3. Use the “Select-Up” or “Select-Down” keys to adjust the output voltage (220V, 230V, and
240V ). Press the “Enter” key to confirm the voltage and then the cursor will move to frequency
selection. The output frequency (50Hz or 60Hz) can be adjusted by the same key operation.
Step 4. Once the correct voltage is selected, press the “Enter” key again to save the selection.
Display 11
– Output Voltage/
Frequency Setting Volt/Freq Set
Save? NO
POWERTRONIX . - Page 18 of Total 29 - January 2006
