PowerTech Promate 600 Owner'S Manual Download Page 2

I. IMPORTANT  SAFETY

INSTRUCTIONS

1.

To  reduce  risk  of  injury,  charge  only  with  the

provided AC adaptor and charging cord. Other chargers

may cause battery to burst causing injury to persons

and damage.

2. Do not expose the Promate chargers to rain and

moisture.

3. Use of accessories not recommended or sold by the

manufacturer may result in a risk of fire,  electric shock,

or injury to persons.

4. To reduce the risk  of damage to the cigarette lighter

connector  and  cord,  disconnect  the  cigarette lighter

connector rather than the cord when disconnecting

charger.

5. Make  sure  the  cord  is  safe  from  being  stepped  on,

tripped  over,  or  otherwise  subjected  to  damage  or

stress.

6. Do  not  operate  the  charger  with  damaged  cord  or

cigarette lighter connector - replace it immediately.

7. Do not operate the Powerstation if damaged any way;

Report it immediately to an authorized Promate service

provider or dealer.

8. Do not disassemble the Powerstation or its charger; ask

help from a service or repair technician authorized by

Promate. Incorrect reassembly may result in a risk of

electric shock or fire.

9. To reduce risk of electric shock, unplug charger before

attempting any maintenance or cleaning.

10. Always correctly orient the Powerstation in the upright

position.

11. Do  not  expose  the  device  to  direct  sunlight,  high

temperature (>40°C) or extreme cold (<0°C).

12. Keep it away from dust and dirt.

13. Warning – Do not expose the Powerstation or battery to

fire or intense heat as it may  explode.

 

14. Never smoke or allow a spark or flame in the vicinity

of battery or engine.

15. Do  not  connect  to  12 Volts  or  24 Volts  battery

system.

16. Use  the  DC  outlet  socket  to  operate  12 Volts

appliances equipped with a cigarette lighter plug.

II. SPECIFICATIONS

GENERAL SPECIFICATIONS: 

Dimension(cm): 

26 x 17.3 x 17 

Gross Weight: 

 5.9 Kgs 

Output: 

DC output car socket (Max. 10 Amps), 13V DC

DC Jack (DC5521) x 2 (5 Amps Max. x 2) 13V DC

USB port : 3 x 5V/2.4 Amps

USB port : 1 x QC 3.0

Type C port (input/output): PD 60W

Wireless Charger: 10W

2 x AC outlets; 220V AC power inverter (total 600

Watts rated), 60Hz Pure sine wave

Work light: 

1 x LED: 3 Watts

 

Charging: 

Charging port DC4017 * rated (12V – 30V, power 

72W – 120W max) 

- Support car (cigarette lighter) charging

- Support AC adaptor charging

- Support solar panel charging (12V – 30V, 120W max)

- Support Type-C charging

Built-in Battery: 

 39Ah 14.6V 569Wh –    

lithium-ion type battery 

Notes: 

1

Summary of Contents for Promate 600









Reviews: