GARAGE DOOR OPENERS USER MANUAL
10
4.4 System learning, reset process, and led display
A. System Learning:
Step1:
Press and hold “RF” and “SET” buttons 3 seconds, the LED display shows “LE”.
Step2:
Press “SET” or “A” button of the transmitter, the motor starts learning process and the display panel shows
“AL”.
Step3:
The chain moves to Close Limit with 50% of full speed and connect the trolley. The LED display shows “OL”
and the trolley moves to the Open Limit
which can be decided by the blocker. The LED display shows “CL” and the trolley moves to the Close Limit.
Step4:
The motors opens and closes automatically with full speed. The LED display shows “SO” while the system
learning complete. The LED display
show “SF” while the system learning fail.
Note:
The over current function and flashing light function will be activated automatically after learning process
complete.
B. Restore Default Setting:
Press “RF” and “DOWN” buttons for 3 seconds, and the LED display shows “CL” to recover the default settings.
C. Motor current auto-detection
The LED display shows the current consumption of the motor
LED Display Programmable Functions
LED Display Programmable Functions
4.5 Programmable function indication led
Start transmitter learning mode.
Operation testing
Cleaned all studied transmitter.
System Learning Fail.
Set up Open Limit.
System Learning Completely.
Set up Close Limit.
System setting clear
During the system learning procedure, the control panel will automatically detect
the current consumption from each motor, indicate the resistance level of the gate
whiling the motor operation. If this reading increase instantly or stay in high
reading, please check if any object in between of the gate moving area, and
contact your installer for inspection.
4.6 How to set the parameter:
Step 1: Press the“Set” key for 3 seconds, the display will show the function code.
Step 2: Choosing the setting by Up and Down keys, after having chosen the indicated item, press the Set key and
enter the setting of this function. The second digit will be shown on the right of the display, indicating the
related function(please refer below chart for details). Using the Up and the Down Keys to choose the setting
function and press the Set key to save.
