PowerTech MP3741, User Manual

Page: 16 / 47

Page 16
3.3 Parameter setting
Load mode setting (Load means switched power output terminals)
Set Load modes as follows as below
Operating Steps:
Under load mode setting interface, press ENTER button and hold for 5
seconds till the number begin flashing, then press SELECT button to select
the parameter, press ENTER button to confirm.
Time 1 Time 2
Light ON/OFF Disabled
Load will be on for 1 hour Load will be on for 1 hour
since sunset before sunrise
Load will be on for 2 hours Load will be on for 2 hours
since sunset before sunrise
～
Load will be on for 3 ～ 13 hours
～
Load will be on for 3 ～ 13
since sunset hours before sunrise
Load will be on for 14 hours Load will be on for 14
since sunset hours before sunrise
Load will be on for 15 hours Load will be on for 15
since sunset hours before sunrise
Test mode Disabled
Manual mode(Default load
Disabled
ON)
NOTE: Please set Light ON/OFF, Test mode and Manual mode via Timer 1.
Timer 2 will be disabled and display
" ".