Specifications
Panel Dimensions
315mm W x 925mm L x 22mm Thick
Panel
15 watts per panel, 14.5 volts output (working)
Peak Voltage
23.5 Voc (Open Circuit Volts)
Nominal Voltage
14.5 volts battery output
Adaptor Outlets from regulator
3 VDC, 6 VDC, 12 VDC, 12 VDC
USB output
12VDC female CLA output
Inverter female CLA output (for 12V inverter)
Accessory
2 pcs of 5W 12VDC energy saving lamp
Multi purpose wire
Battery clamp wire
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance
procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be followed to reduce the risk of
personal injury and damage to equipment.
Read all instructions before using this product!
1. Keep work area clean.
Cluttered areas invite injuries.
2.
Observe work area conditions
.
Do not use the Regulator in damp or wet locations. Don’t expose Regulator to rain.
Do not use electrically powered products in the presence of flammable gases or liquids.
3.
Keep children away
. Children must never be allowed in the work area. Do not let them handle product, accessories, or
cords.
4.
Store idle equipment
.
When not in use, products must be stored in a dry location to inhibit rust. Always lock up
products and keep out of reach of children.
5. Use the right product for the job.
Do not attempt to force a small product to do the work of a larger industrial
product. There are certain applications for which this product was designed. It will do the job better and more safely at the
rate for which it was intended. Do not modify this product and do not use this product for a purpose for which it was not
intended.
6. Dress properly.
Do not wear loose clothing or jewelry as they can be caught in parts during installation. Protective,
electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to
contain long hair.
7.
Use eye protection
. Always wear ANSI-approved impact safety goggles during assembly and when working with tools
and equipment.
8.
Do not overreach
. Keep proper footing and balance at all times. Do not reach over or across wires or cables.
9.
Maintain products with care
. Keep products clean for better and safer performance. Follow instructions for changing
accessories. Inspect product cords periodically, and if damaged, have them repaired by an authorized technician. The panels
must be kept clean, dry, and free from oil and grease at all
times.
10.
Disconnect power
. Unplug from accessories or batteries when not in use and disconnect the
