Refer to Figures 2 - 5.
CAUTION:
Do not attempt assembly if parts are missing.
Use this manual to order replacement parts.
Do not operate machine until completely assembled.
Do not operate machine until you have completely read
and understood this manual.
ATTACH ABRASIVE SLEEVES
Refer to Figures 2 and 3.
TO ATTACH ½ ABRASIVE SLEEVE
• Place the ½ table insert over spindle and onto the table.
The top side of the insert has directional arrows, as
shown.
• Slide sleeve over the spindle.
• Tighten the knob by turning counterclockwise to secure
sleeve in positon so that sleeve will not spin loose
during operation.
TO ATTACH ¾” – 3” ABRASIVE SLEEVES
Example: 2”
• Place the 2” table insert over spindle and onto the table.
The top side of the insert has directional arrows, as
shown.
•
Slide 2” sleeve over the 2” drum first, then slide drum
with sleeve onto spindle.
• Place 2" drum washer on drum.
• Tighten the knob to secure drum in position. Knob and
washer must hold the drum securely so that it does not
spin loose during operation.
ONBOARD STORAGE
Onboard storage is provided to hold drums, inserts and
washers.
3
ASSEMBLY
WARNING
Figure 2- Attaching the 1/2” Sleeve
Figure 3- Attaching 2” Drum with Sleeve
Figure 4- Onboard Storage
Knob
Sleeve
Direction Arrow
on Insert
Knob
2” Drum
Washer
Direction Arrow
on Insert
Table Inserts
Drum Washers
Drums with
Sleeves
