PowerSmith MAGLITHION MLMS12C, Operator'S Manual

Page: 4 / 40

4
English
• Use the correct power tool for the job.
Don’t force the tool or attachment to do a
job for which it is not designed.
• Do not use tool if switch does not turn it on or off.
Any tool that cannot be
controlled with the switch is dangerous and must be repaired or replaced by an authorized service
center
.
• Turn power tool off, and disconnect the plug
from the power source and/or
battery pack from the power tool before making any adjustments, changing the accessories, or
storing the tools
.
Such preventive safety measures reduce the risk of an accidental start up which
may cause personal injury
.
• Store idle tools out of reach of children and other inexperienced
persons.
It is dangerous in the hand of untrained users.
• Maintain power tools with care.
Check for proper alignment and binding of moving
parts, component breaks, and any other conditions that may affect the tool’s operation. A guard
or any other part that is damaged must be properly repaired or replaced by an authorized service
center to avoid risk of personal injury.
• Use recommended accessories.
Using accessories and attachments not
recommended by the manufacturer or intended for use on this type tool may cause damage to
the tool or result in personal injury to the user. Consult the operator’s manual for recommended
accessories.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control
.
• Feed the work piece in the correct direction and speed.
Feed the work
piece into a blade, cutter, or abrasive surface against the direction of the cutting tool’s direction of
rotation only. Incorrectly feeding the work piece in the same direction may cause the work piece to
be thrown out at high speed.
• Never leave the tool running unattended, turn the power off.
Do not
leave the tool until it comes to a complete stop.
• Never start the power tool when any rotating component is in
contact with the work piece.
BATTERY TOOL USE AND CARE
•
Ensure the switch trigger is in the off position before inserting
battery pack.
Inserting the battery pack into power tools that have the switch on invites
accidents.
•
Recharge only with the charger specified by the manufacturer
. A
charger that is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
•
Use battery tools only with specified battery pack
. Use of any other battery
packs may create a risk of injury and fire.
•
Avoid storing battery pack in a container with other metal objects
such as nails, coins, clips, keys, screws, or other small metal objects that can make a connection
from one terminal to another. Always protect the battery terminals when battery pack is not being
used. Connecting the battery terminals together may cause burns or a fire.