13
WARNING:
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or
fire:
•
Replace the battery pack or the charger immediately if the battery case or charger cord is damaged.
•
Verify that the battery pack is removed before inspecting, adjusting, or performing maintenance on
any part of the string trimmer.
•
Read, understand, and follow the instructions.
STARTING THE CHAIN SAW
•
Insert the battery pack.
•
Make sure that there are no obstructions in contact with the guide
bar and the chain.
•
Pull the brake baffle toward the battery pack and ensure that it
remains in the working position(see fig.1).
•
Hold the front handle with you left hand, and hold the rear handle
with your right hand.
•
Push forward the lock-off button and hold the trigger switch so
that the chain saw is started(see fig.2).
STOPPING THE CHAIN SAW
•
Remove the chain saw from the cutting area, release the trigger switch and stop the chain saw.
•
Push the brake baffle forward to switch it to the braking position.
WARNING:
The tool runs for approximately 4 seconds after it has been switched off. Let the motor come
to a complete standstill before setting the tool down.
PROPER GRIP ON HANDLES
•
Wear non-slip gloves for maximum grip and protection.
•
With the saw on a firm, fiat surface, hold the saw firmly
with both hands.
•
Always grasp the front handle with the left hand and the
rear handle with the right handle.
•
The fingers should encircle the handle, with the thumb
wrapped under the front handle (see fig.3).
Fig.1
Fig.2
Fig.3
Summary of Contents for PS76120A
Page 2: ...2 ...
Page 21: ...21 EXPLODED VIEW PARTS LIST ...