13
MAINTENANCE
WARNING
: Disconnect the tool from the air compressor before adjusting, clearing jams,
servicing, Relocating and during non-operation.
1.
Regular lubrication of the tool is required. Add 2 to 6 drops of lubricant oil into the air inlet before
each work day or after 2 hours of continuous use depending on the characteristic of work piece or
type of fasteners.
2.
Check and change all worn or damaged o-rings, seals, etc. Tighten all the screws and caps to avoid
personal injury.
3.
Inspect trigger and safety mechanism to assure system is complete and functional with no loose or
missing parts.
4.
Keep magazine and workpiece contact trip clean and free of any dirt lint or abrasive particles.
