10
Drive Speed Control Lever
Move the drive speed control lever to the desired
speed. There are eight(8) settings:six (6) forward
speeds and two (2) reverse speeds. 1 is the
slowest forward speed and 6 is the fastest
forward speed. R1 is the slowest reverse speed
and R2 is the fastest reverse speed.
Note: There is no neutral drive setting since
the drive control handle must be engaged for
movement. Neutral is achieved when the
drive control handle is disengaged.
Chute Discharge Direction
Adjustment
WARNING - Never direct the snow discharge
chute at the operator, bystanders, vehicles or
nearby windows. Discharged snow and foreign
objects accidentally picked up by the Snow
Thrower can cause serious damage and severe
bodily injury. Always point the discharge chute in
the opposite direction from potential hazards.
The discharge chute can be adjusted 180º by
rotating the chute rotation handle. Rotate the
chute rotation handle clockwise to move the
discharge chute to the left; counterclockwise to
move the chute to the right.
Chute Discharge Angle Adjustment
WARNING! Always disengage the drive and
auger control handles before making
adjustments. Make sure the augers are
stopped and the machine is not moving.
The angle of the chute deflector controls the
discharge distance of the snow. Raising the
angle will increase the distance. Lowering the
angle will decrease the distance.
The angle can be adjusted by moving the chute
deflector control lever. Move the lever to the left
to raise the throwing height and move the lever to
the right to lower the throwing height.
