12
2.
To prevent the extension cord from disconnecting during use, tie the female end of
the extension cord in to a loose knot on the top right side of the middle frame (B)
before connecting to the male plug in the socket of the snow thrower.
Note: The protective cover around the polarized plug is compatible with most extension
cords. When choosing an extension cord be sure the female end of your cord will fit
into the polarized plug.
3.
Note that the snow thrower has a polarized male plug (O), with one prong in the
socket slightly longer and wider than the other. The extension cord female end
should be likewise polarized, so that the extension cord fits snugly into the socket.
WARNING
Damaged electrical cords present risk of fire, electric shock, and serious bodily injury.
Before operating the snow thrower, carefully examine the electrical cord. Id the cord is damaged, do not use the
snow thrower. Replace or repair the damaged cord immediately. If you need assistance, contact our customer
service department at 1-800-791-9458.
POWERING ON AND OFF
1.
Connect extension cord to the male plug on the snow thrower then connect
extension cord to proper AC power source.
2.
Press and Hold the switch button.
3.
To start, while holding the switch button in, pull the handlebar toward you until it
touches the handle. The switch button must be pressed in and held before pulling
the
handle. Once the snow thrower starts, release the switch button.
4.
To stop, release switch button.
