8
4.
Minimum space in the room where the refrigerator is being installed
is 10 cubic metres.
5.
Choose a location where there is no heat source. Keep the refrigerator
away from direct sunlight, oven etc.
6.
Do not place the appliance near cookers, radiators or in direct sunlight
as this will cause your appliance to work harder.
7.
Don’t install this appliance in a wall recess or into fitted cabinets.
8.
Allow a gap of 3.5” between the back grille and the wall.
9.
Allow a gap of 2 cm either side of the unit.
10.
To ensure that your appliance is level adjust the levelling feet at the
front by turning them
Before you start using the refrigerator check that:
1.
The interior is dry and air can circulate freely at the rear of the
cabinet.
2.
Clean the interior as recommended under "CLEANING AND CARE."
3.
Insert the plug into the wall socket and switch on the electricity
supply.
4.
You will hear a noise as the compressor starts up. The liquid and gases
sealed within the refrigeration system may also give rise to noise,
whether the compressors running or not which is quite normal.
5.
Front edges of the cabinet may feel warm. This is normal.
6.
Do not load the appliance immediately it is switched on. Wait until the
Correct storage temperature has been reached. We recommend that
You check the temperature with an accurate thermometer or wait 24
hours.
How to Use the Refrigerator Compartment:
Cooked /fresh foods may be stored in your refrigerator. Hot foods
must first be allowed to reach room temperature before storage
Food Storage
You created this PDF from an application that is not licensed to print to novaPDF printer (