appliance is out of carton never lift or move by using the door.
Installation
1.In order to Prevent vibration and noise install the refrigerator on flat, firm
surface.
2.Choose a well-ventilated place. A space of no less than 10cm must be left
around the refrigerator.
3.Choose a location where there is no heat source. Keep the refrigerator
away from direct sunlight and oven etc..
4.Choose a dry and well-ventilated place where there is no corrosive air.
Testing
1.Clean the parts of the refrigerator with lukewarm water containing asmall
amount of washing up liquid , then wipe dry
Notes: Electric parts of the refrigerator can only be wiped by dry cloth.
2.Turn the thermostat knob to the "3" position, turn on electricity. The
compressor and the light inside the refrigerator begin to work.
3.Close the door and leave for 30 minutes, if the temperature on back wall
decreased obviously, it shows that the refrigerator system is working
Temperature Control
1.The temperature in the refrigerator compartment is controlled by the
temperature controller installed on the side wall of the refrigerator
compartment.
2.Turn the thermostat knob to right or left, you can regulate the temperature
inside the refrigerator.
Storage of Food
1.How to Use the Refrigerator Compartment
*Cooked food can be put into the refrigerator to keep fresh after the
temperature decreases to room temperature
*To prevent ordors food should be wrapped in aluminum foil, placed in
suitable polythene bags and stored in proper airtight containers.
2.Placement of Food
*Sufficent space should be left between foods, Over filling will causethe
appliance to fail
*Food to be stored should be wrapped with clean plastic film.
