Incorporates a 13 A fuse. Should the fuse need to be changed a fuse of the same
rating must be used. Ensure that the fuse cover is refitted.
1.
Install the Freezer on a flat surface in order to prevent vibration and noise.
2.
If required adjust the levelling feet at the front by turning them.
3.
Choose a dry well-ventilated place.
4.
Take care not to damage your flooring, pipes, wall coverings etc.
5.
This appliance is not designed for stacking with any other appliance
6.
Minimum space where this freezer is being installed is 10 cubic metres.
7.
Choose a location where there is no heat source. Keep the appliance
Away from direct sunlight, oven etc.
8.
Insert the plug into the wall socket and switch on the electricity supply.
You will hear a noise as the compressor starts up. The liquid and gases
Sealed within the system may also give rise to noise, whether the
Compressor is running or not which is quite normal.
9.
The red light should come on indicating connection to power, the green
light will glow indicating that the compressor is running
10.
Set the thermostat to 2 and close door. After 30 minutes you should
observe a drop in temperature.
11.
Front edges of the cabinet may feel warm. This is normal.
12.
Do not load the appliance immediately it is switched on. Wait until the
Correct storage temperature has been reached. We recommend that
The temperature be checked with an accurate thermometer or wait for
24 hours.
If installed close to a source of heat or a refrigerator allow the following
minimum side clearance:
From Cookers
4”
100mm
From Radiators
12”
300mm
From Fridges
4”
100mm
Installation Instructions
