Temperature alarm function
The sensor temperature will be detected after the freezer is energized for 3
hours. If the sensor temperature is higher than -12
℃
, the alarm indicator lights on,
and the buzzer sounds at the frequency of 2Hz, which can be stopped by pressing
any key under the key unlock state. And if the sensor temperature is still higher
than -12
℃
three minutes later, the buzzer resumes sounding. To press any button
under the button unlock state can stop the buzzer sounding.
When the freezer sensor temperature falls below -12
℃
, the alarm indicator
lights off, and the buzzer stops sounding automatically.
Indicator lights
•
Freezer current state, the power indicator light lit. When state changes (i.e.,
digital flash), show all the bright display; A modified state (that is, the digital stop
flashing), half light show
.
•
The “Power” indicator lights up if any key operation. When the state is
changed (i.e. digital flashing), the light will be bright and it turns semi-bright if no
key operation within 1minute.
•
Freezer power off, the power indicator light goes out.
Suggestion
: The default factory temperature setting is -18
℃
.
If there is a power failure do not open the lid. Frozen food should not be
affected if the failure lasts for less than 20 hours. If the failure is longer,
Then the food should be checked and eaten immediately or cooked and then
refrozen.
•
We recommend that you switch off the appliance at the socket outlet
and pull out the mains plug before cleaning
•
Never use any sharp abrasive instrument, soap, household cleaner,
detergent and wax polish for cleaning
•
Wash with a weak solution of bicarbonate of soda. Then rinse with warm
water using a damp sponge or cloth and wipe dry
Cleaning and Care
