PowerPoint P05E2S1BL, Instructions Manual, Page: 15 / 24

●
Open door, unlock by pulling the hinge lock upwards with a screw
driver
●
Bring the hinge lock to the widest angle, bring both hinges connecting
the oven door to the same position
●
Close the oven door to lean on the hinge lock
●
To remove the oven door, pull it upwards by holding with both hands
when close to the closed position
Cleaning the Hob Top
●
Remove any residues of cleaning agents with warm soapy water
●
Abrasive cleaners or sharp objects will damage the hob surface, use
warm soapy water
●
It is easier to clean some deposits whilst the hob surface is still warm,
but be careful of burns
●
Wipe the hob over with a damp cloth and a little washing up liquid after
each use
●
Dry the appliance by rubbing the surface with a clean cloth
●
To maintain the solid plates remove spillages using a soft brush, plastic
or nylon scourer and warm water
●
To keep the solid plates in good condition put a little olive oil onto a
kitchen towel and rub it onto the surface of the plate. Alternatively you
can use a hotplate conditioner. If the solid plates are not maintained
regularly with olive oil or a hotplate conditioner they may rust
IMPORTANT:
The oven must be disconnected from your mains supply
before you attempt to either remove or replace the oven
bulb.
●
Remove all oven shelves and the drip tray
●
Unscrew the lamp cover by turning anti-clockwise
●
Unscrew the bulb and replace with a 15 W bulb
●
Screw the lamp cover back into its original position