Control Panel.
•
The hob is fitted with 4 hot plates 2 x 145mm and 2 x 180mm
•
The rings are controlled by switches giving varying outputs 1 being the lowest
6 the highest heat.
•
The knob rotation is clockwise 1-6
•
The surface of the hotplates are covered with a protective layer on first use
turn the plate on for five minutes this will burn off the coating.
•
Please use pans and saucepans with flat heavy bases which cover the plate
fully as shown in Figure 9.
•
Clean the plates using a damp cloth with a small amount of detergent (if
required) finish by applying a small amount of oil this will extend the life of
the plates and improve their appearance.
Ceramic Hob
•
The hob has 4 heating areas 2 x 180mm and 2 x 145mm
•
The control knob should be turned clockwise to increase the temperature.
•
Always ensure the knob is in the “0” position when not in use.
•
Allow the hob to cool fully before cleaning heavy soiling may be removed
with the use of a scraper designed for the purpose and then cleaned using a
ceramic cleaner.
•
Always use saucepans with flat bottoms this avoids hotspots and overheating.
•
Do not use cast iron cookware on the ceramic hob.
•
If any damage or cracking should appear always turn the power off at the
supply and contact service, as there is danger of electric shock.
