background image

  POW X0153, 0155 & 0157 

EN

 

Copyright © 2011 VARO 

P a g e

 | 11

 

www.varo.com 

14 WARRANTY 

  This product is warranted for a 36-month period effective from the date of purchase by the 

first user. 

  This warranty covers all material or production flaws. It does not include defective parts 

subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories 
such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, 
accidents or alterations; nor the cost of transportation. 

  This warranty covers all material or production flaws, excluding batteries, chargers, 

defective parts subject to normal wear and tear such as, in particular, bearings, brushes, 
cables, plugs… Accessories such as drills, drill bits, saw blades etc. also do not fall under 
this warranty.  

  Damage and/or defects resulting from inappropriate use also do not fall under the warranty 

provisions. 

  We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool. 

  Repairs may only be carried out by an authorised customer service centre for Powerplus 

tools. 

  You can always obtain more information at the number 00 32 3 292 92 90. 

  Any transportation costs shall always be borne by the customer, unless agreed otherwise in 

writing. 

  At the same time, no claim can be made on the warranty if the damage of the device is the 

result of negligent maintenance or overload. 

  Definitely excluded from the warranty is damage resulting from fluid permeation, excessive 

dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate 
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not 
following the instructions given in the manual), inexpert assembly, lightning strike, erroneus 
net voltage. This list is not exhaustive. 

  Acceptance of claims under warranty can never lead to the prolongation of the warranty 

period nor commencement of a new warranty period in case of a device replacement. 

  Devices or parts which are replaced under the warranty  therefore remain the property of 

Varo NV. 

   We reserve the right to reject a claim whenever the purchase cannot be verified or when it 

is clear that the product has not been properly maintained. (Clean ventilation slots, carbon 
brushes serviced regularly, etc.). 

  Your purchase receipt must be kept as proof of date of purchase. 

  Your appliance must be returned undismantled to your dealer in an acceptably clean state, 

(in its original blow-moulded case if applicable to the unit), accompanied by proof of 
purchase. 

15 ENVIRONMENT  

Should your appliance need replacement after extended use, do not dispose of it 
with the household refuse, but   in an environmentally safe way. 
Waste  of  electrical  products  should  not  be  disposed  of  with  household  waste. 
Please recycle where facilities exist. Check with your Local Authority or retailer for 
recycling advice. 

16 BATTERY PACK 

This product contains nickel-cadmium. To preserve natural resources, please recycle or 
dispose of batteries properly. Local, state or federal laws may prohibit disposal of nickel-
cadmium batteries in ordinary trash. Consult you local waste authority for information 
regarding available recycling and/or disposal options. 

Summary of Contents for POWX0153













Reviews: