PowerLink module Setup and monitoring
procedure
PowerLink set up
Connect the power adapter to the PowerLink module’s USB-Micro power port
(2)
and
power on.
Connect an ethernet cable from an internet connected source (modem/router) to the
internet RJ45 port
(5)
on the right hand side of the PowerLink module.
Web interface setup
Open your WiFi network settings and connect to “PPE-Powerlink-xxxx” where xxxx is
taken from the serial number of the module. The password is “12345678”
Open your web browser - in the address bar, enter:
• Press the “Configuration” button
• Press the “Reset data” button
• Enter the Number of Batteries in this installation and press the “Submit” button
PowerLink Installation
and Operation Manual
V 3.2
Page of
6
8