PROBLEM SOLVING
s
Problem
Possible Causes
How to Solve
The appliance
fails to work.
The appliance is
NOT plugged in.
Plug the appliance into the electric mains
and switch it on.
Household power
circuit has blown.
Check the household circuit breaker for any
tripped wires. Call for a qualified electrician.
Fuse on appliance
is blown.
Send the appliance to the service centre for
checks.
Water levels in
the Tub
remain low
Bellows in the
Overflow Filter is
misaligned or
mis-installed.
Reinstall the Bellows in the Overflow Filter.
If unable to do so, send the appliance to the
service centre for checks.
Water is NOT
able to be
drained out of
the appliance
The Water Outlet
Pipe is NOT
lowered.
Lay down the
Water Outlet Pipe on the
ground and make sure water can flow out
horizontally or downwards out of the Tub.
Water flows
out very
slowly
The Water Outlet
Pipe has NOT been
fixed properly.
Check the connection of the Water Outlet
Pipe to the base of the appliance.
The Water Outlet
Pipe has blockages
along the inside of
the pipe.
Detach the Water Outlet Pipe from the base
of the appliance and remove any blockage
before re-attaching the pipe
Abnormal
sounds
emitting from
the appliance
while
operating
Items like coins that
were NOT removed
from clothes
became dislodged.
Loose ends of
clothes or zippers
made these sounds
as they move
around theTub.
Remove loose items like coins, sweets,
wrappers, tissue, paper, etc. which may be
found in shirt or trouser pockets prior to
putting the clothes into the Tub.
Tie up loose ends of skirts, shawls, overalls,
aprons, etc. and pull up all zippers of jeans,
jackets, skirts, pants, etc. prior to putting
them into the tubs.
Sounds &
vibration while
spinning
Abnormal sounds &
violent vibration
emitting from the
Spin Tub.
Place the machine on flat and solid ground.
Ensure that the clothes are evenly
distributed within the Tub. Press the clothes
down firmly.
