c.
Place the Base on a dry, horizontal, stable and heat-resistant surface. Plug
the power cable attached to the Base into the wall socket. Switch the wall
socket ON. Press the ON/OFF Switch on the Handle down. Heating will
commence immediately.
d.
The appliance switches off automatically several seconds after water has
started boiling. Switch the wall switch OFF and unplug the power cable from
the wall socket. Wait for the water to cool after boiling. Discard the water.
e.
Rinse the Lid and internal surface of the Kettle Jug under running water. Be
careful NOT to allow water to enter the internal parts of the Kettle Jug or the
Base. Thereafter the appliance is safe to use.
f.
Make sure to remove any label or protective sheet which may prevent its
proper functioning.
DO NOT:
cover the appliance during functioning;
obstruct totally nor partially the Spout;
insert objects or body parts inside the protection cover of the appliance;
overfill water (beyond the MAX mark on the container) to avoid overflow of hot
water;
place the appliance and heat it by any other means, e.g. in a microwave, oven
or on a frying pan filled with water and placed directly on a gas stove, as the
plastic components can be deformed as a result;
switch the appliance on if it is empty – however, should the appliance be
found empty during operation, immediately press the ON/OFF Switch up,
switch the wall switch OFF and unplug the power cable from the wall socket.
Add water to the inside of the Kettle Jug;
press the ON/OFF Switch too forcefully;
leave the appliance unsupervised during operation.
16.
During the period of heating/boiling, high temperature steam will be emitted from
the Spout. To avoid scalding:
DO NOT:
fill the appliance with hot water;
fill the appliance with less than 50% & beyond the maximum volume
indicated;
allow all of the water to be boiled away;
operate with the Lid open & ensure that the Lid is tightly closed during
heating;
place any container inside the appliance;
touch any part of the appliance, except the Handle, ON/OFF Switch and
power cable, when the appliance is filled with hot/boiling water. The Base
and the bottom of the appliance become exceedingly hot as the appliance
operates. Do note that the liquids & gases inside the appliance itself
would still be very hot during heating, and for some time after the plug has
