HOW TO ASSEMBLE
s
Warning: DO NOT operate the fan with any of its parts unassembled. The entire
assembled unit works as a single appliance. The fan must only operate in the upright
position. Any other position will be hazardous.
1.
Unpack all parts from the package and place them on the floor.
2.
Unscrew the
⑳
L
-
screw with Washer from the
⑯
Outer Pole and put it aside
temporarily. Insert the
⑲
Small Base Cover into the
⑱
Base (with the
⑰
Base
Cover attached on top). To these, insert the
⑯
Outer Pole containing the
⑭
Extension Pole onto the
⑱
Base and tighten it with the L
-
screw, with the Washer
placed in between the
⑱
Base and the
L
-
screw.
3.
Pull the
⑭
Extension Pole out of the
⑯
Outer Pole to your desired height and
tighten using the
⑮
Height Adjustment Ring between the
⑭
Extension Pole and
the
⑯
Outer Pole.
4.
Insert the Main Body onto the top of the
⑭
Extension Pole. Secure it by
tightening the Switch Case Locknut.
