www.powermaxfitness.net
17
C.
If you observe that the instantaneous step makes the treadmill belt and multi-wedge belt
stop, but the motor is still running, it indicates that the multi-wedge belt is loose and
appropriate adjustments must be made to facilitate the safe use
Step 2:
Use a wrench to adjust the screws on the motor base according the condition. Meanwhile,
gently flip the multi-wedge belt between the motor shaft and the front roller, if it is too loose,
you can flip the multi-wedge belt by 100%; if it is too tight, the degree for you to flip the belt is
very limited. It is appropriate to flip the multi-wedge belt by 80% after adjustment. Please adjust
the tightness of the multi-wedge belt into the state that it could be flipped by 80%.
Step 3:
Finally lock the motor base, and install the front cover.
Applying Silicone Oil
Step 1:
Open up the treadmill belt
Step 2:
Open the silicone oil bottle, squeeze the silicone oil the to running board side, as shown
in the following Figure:
