www.powermaxfitness.net
9
Step 3. (only for multifunction)
up and down U-shaped tube first place the rubber
protection sleeve at each side of U-shaped tube,
assembly 2 ends of U-shaped tube to iron plate of
left and right stand column with M8*40 screws, lock
with nuts (special attention, the middle screw hole of
U-shaped tube point to the bevelled-up direction-
tube should not trap the L iron. Put on the above it's
approved. Down U-tube with foam, and upper
without it) see on the right picture.
Step 4. (only for multifunction)
Functional frame use two M8*40 screws to fix the
functional frame on the top and bottom U tube.
Step 5. (only for multifunction)
Massager
1. First, screw off the three M8*16 screws below the
massage machine head, (include flat washers and
spring washers), and then place the massage
machine head on the functional frame, and tighten
up with the above unloaded screws.
