background image

 

 

www.powermaxfitness.net 

23 

You need to tighten the running belt again if the above steps fail to reach the effect. 

Lubricating oil

  

The treadmill is oiled when leaving the factory, but lubricity of treadmill shall be inspected 
frequently, which helps to keep it in optimum state. The treadmill must be oiled after 1 year or 
running for 100h. Lift one side of the running belt and touch the surface of running platform after 
running for 30h or 30 days. It is unnecessary to lubricate if there is silicone oil; if the surface is 
clearly dry, please oil it as instructed below.  
Please use non-petroleum silicone oil  

How to oil the treadmill:

  

1.

 

As shown in the figure, it needs to oil the running belt after the treadmill is used for some 
time. Lift one side of the running belt, place the silicone oil bottle below the running belt 
and apply silicone oil to running board. (Apply silicone oil to the middle of running board)  

2.

 

Turn on the treadmill to run for some time after oiling to uniformly apply silicone oil to 
running belt. Note: stop the treadmill to make the running belt still when oiling the running 
belt. Lower surface in the middle of running belt. 

Cleaning  

Frequently clean the treadmill to guarantee its service life.  

 

Warning:

 cut off the power when cleaning the treadmill. The power line must be pulled 

out from the socket.  

 

After use:

 clear sweat stains and sundries on instrument and other parts with clean towel 

and damp cloth.  

 

Note:

 don't use corrosive articles and liquid to prevent damage to electronic elements. 

Don’t expose electronic elements to sunlight.  

 

Every week:

  clean the ground every week, and clear dirt brought by shoes and other 

sundries on the ground. 

Storage:

 please place your treadmill in clean and dry environment, and ensure that power switch 

is off and plug is not in power socket.  

Movement and folding handling:

 Wheel is added in design to move the treadmill. Please confirm 

that power is off and the body of treadmill is folded before moving. 

13. Important Matter  

• Warning 

 

Please consult your doctor and receive complete physical examination before using the product. 
Don't carry out  

Summary of Contents for TAC-650


























Reviews: