100
the frame with 2pieces of Hexagon Flange BoltsM6.
4. Use Hoops (4pcs) and Rubber Pipes (2pcs) to connect
Water Cooling System with Engine.
Pour the high quality refrigerating fluid into the water tank
after install.
Recommended antifreeze:
High quality ethylene glycol antifreeze containing
corrosion inhibitors for aluminum engines.
Antifreeze and water mixing ratio:
1:1
Total amount:
1.8L(1.58 lmp qt,1.90 US qt)
Coolant reservoir capacity
(Up to the maximum level mark):
0.3L (0.26lmp qt, 0.32 US qt)
。Start engine when pour full the refrigerating fluid, loose
the exhaust nut on the pipe, the water level will get lower at
this time, Supply the refrigerating fluid until the water level
stop to change, then screw the exhaust nut, cover the water tank
lid. The water tank inspection is finished. .
