7
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for a Powermatic Model WP2510 Planer. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine
has been designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.
Specifications
Model Number..............................................................................................................................WP2510
Stock Number...............................................................................................................................1791303
Main Drive Motor ................................................................TEFC, 15HP, 3Ph, 230/460V (pre-wired 230V)
Table Hoist Motor ......................................................................................................... TEFC, 1/2HP, 3Ph
Maximum Cutting Width (in.).................................................................................................................. 25
Maximum Cutting Thickness (in.) ............................................................................................................. 9
Full Width Cutting Depth (in.)................................................................................................................ 1/8
Maximum Cutting Depth (in.) ................................................................................................................ 1/4
Minimum Planing Length (in.) ................................................................................................................ 10
Number of Knives, Helical Head ................................................................ 168 (four-sided carbide inserts)
Segmented Infeed Roll Diameter (in.) ...................................................................................................... 3
Steel Outfeed Roll Diameter (in.) ....................................................................................................... 2-1/2
Cutterhead Speed (RPM) ................................................................................................................. 5,000
Cutterhead Diameter (in.) .................................................................................................................. 3-3/8
Feed Rate (FPM)......................................................................................................................... 30-25-20
Table Size (L x W)(in.) ............................................................................................................32-3/16 x 26
Dust Port Diameter (in.) ........................................................................................................................... 5
Shipping Weight (lbs.)....................................................................................................................... 1,760
Net Weight (lbs.)............................................................................................................................... 1,585
Overall Dimensions (L x W x H)(in.) .................................................................................. 42 x 53-1/2 x 60
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.
Summary of Contents for WP2510
